Skip to content

Australia Stamp Duty Calculator

Estimate stamp duty (transfer duty) on a property in NSW, Victoria, Queensland, Western Australia, South Australia, Tasmania or the Northern Territory, using rates checked on 28 October 2026. This Australia stamp duty calculator covers owner-occupier and first home buyer concessions where they can be verified, and foreign purchaser surcharges. The ACT is not included yet.

AU

For Australia only. Uses current Australian state and territory duty rules (checked 28 October 2026). Duty works differently in other countries.

The price paid, or market value if higher.

Buying as

Stamp duty in New South Wales

A$27,937

General rates. About 3.72% of the price.

Transfer duty
A$27,937
Foreign purchaser surcharge
A$0
Duty at general rates
A$27,937
Saved by concession
A$0
Share of price
3.72%

An estimate only. Rates change, often on 1 July, and concessions have eligibility conditions. Confirm the exact amount with your state revenue office or conveyancer.

How to use this calculator

  1. 1 Pick the state or territory and enter the property price.
  2. 2 Choose owner-occupier or investor. For owner-occupiers, tick first home buyer and say whether the home is new or established.
  3. 3 Tick foreign purchaser if you are not an Australian citizen or permanent resident.
  4. 4 Read the total duty, the duty at general rates and what the concession saves you.

What is stamp duty?

Stamp duty is a tax that a state or territory charges when a property changes hands. Most states now call it transfer duty. You pay it once, usually at settlement, and it is based on the price or the market value if that is higher.

Each state sets its own rates, so the same price can cost very different amounts depending on where you buy. Concessions can cut the bill a lot for owner-occupiers and first home buyers.

Duty is only one buying cost. Legal fees, registration fees and mortgage costs come on top, and this tool does not include them. Work out what you can borrow with the borrowing power calculator, then test repayments in the mortgage calculator. For the deposit, try the down payment calculator.

How much duty does the same price cost?

The table compares a A$750,000 established home across the seven states and territories. The first column shows what an investor pays at general rates. The second shows an owner-occupier who is not a first home buyer.

Queensland stands out, because its home concession cuts the bill for people who live in the property. Victoria also has a concession for owner-occupiers, but it applies only to homes up to a lower price.

Duty on a A$750,000 established home
State or territoryInvestorOwner-occupierShare of price (owner)
New South WalesA$27,937A$27,9373.72%
VictoriaA$40,070A$40,0705.34%
QueenslandA$26,775A$19,6002.61%
Western AustraliaA$29,741A$29,7413.97%
South AustraliaA$35,080A$35,0804.68%
TasmaniaA$28,935A$28,9353.86%
Northern TerritoryA$37,125A$37,1254.95%

First home buyer concessions

First home buyers can pay much less, or nothing, in most states. The rules differ in price limits and in whether the home must be new. You also need to meet other tests, such as living in the home for a set time.

The tool includes the concessions below. Where a revenue office does not publish the formula for a price band, the calculator says so instead of guessing.

  • NSW: no duty up to A$800,000. A reduced rate applies up to A$1,000,000, which the tool does not work out.
  • Victoria: no duty up to A$600,000, then a sliding concession up to A$750,000.
  • Queensland: no duty on a new home with no price cap. For an established home, no duty up to A$700,000, phasing out before A$800,000. The tool does not work out the phase-out.
  • Western Australia: no duty up to A$600,000, then a reduced rate on the part above it, up to A$800,000.
  • South Australia: relief on new homes only.
  • Northern Territory: a First Home Owner Discount of up to A$23,928.60 on established homes valued at A$650,000 or less.
  • Tasmania: the tool does not apply first home relief, because the State Revenue Office lists it only to 30 June 2026.

Foreign purchaser surcharges

Foreign purchasers pay an extra surcharge on residential property in some states. The tool adds it to the duty: NSW 9%, Victoria 8%, Queensland 8%, Western Australia 7% and Tasmania 8% of the price.

For example, a foreign purchaser buying a A$750,000 home in NSW pays A$67,500 of surcharge on top of A$27,937 of duty. South Australia and the Northern Territory list no such surcharge, so the tool adds none.

Foreign purchasers usually cannot claim first home concessions. Western Australia is the exception for its first home owner rate.

What this calculator does not cover

The ACT is not included yet, because its 2026-27 rate table was not available to check. Some first home bands are also missing: NSW between A$800,000 and A$1,000,000, Queensland between A$700,000 and A$800,000, and Tasmanian relief. In those cases, the tool tells you to use the state calculator.

It also leaves out pensioner and senior concessions, off-the-plan and vacant land rules, other Northern Territory rebates, and registration and mortgage fees. Check with your state revenue office or conveyancer before you rely on a figure.

The formula

Transfer duty

Duty = base amount for the band + rate × (value − band start)

NSW example
A$387,001–A$1,290,000: A$11,602 + 4.5% of the value over A$387,000
NT
up to A$525,000: 0.06571441 × V² + 15 × V (V in thousands); above that 4.95% of the whole value
Surcharge
NSW 9%, VIC 8%, QLD 8%, WA 7%, TAS 8% of the price for foreign purchasers

Worked example

A $450,000 property in NSW

  1. 1.Band: $387,001 to $1,290,000, so $11,602 plus 4.5% of the amount over $387,000
  2. 2.$11,602 + $63,000 × 0.045 = $11,602 + $2,835 = $14,437
  3. 3.This matches the worked example on the Revenue NSW website

$14,437

Frequently asked questions

How is stamp duty calculated in Australia?

Each state has a table of bands. You pay a set amount for the band your price falls in, plus a rate on the part above the start of that band. Concessions then reduce the result for some buyers.

How much is stamp duty on a $750,000 home in NSW?

At general rates, it is A$27,937, about 3.72% of the price. A first home buyer pays nothing up to A$800,000, and the tool does not work out the reduced rate between A$800,000 and A$1,000,000.

Why is the ACT missing?

The ACT Revenue Office pages available when this was built did not publish its 2026-27 rate table. The ACT is left out rather than risk a wrong figure.

Which first home concessions are included?

The tool covers these states. NSW has no duty to A$800,000. Victoria has no duty to A$600,000, sliding to A$750,000. Queensland has new homes with no cap, and established homes to A$700,000. Western Australia has no duty to A$600,000 and a reduced rate to A$800,000. South Australia covers new homes, and the NT has the First Home Owner Discount. Where a state does not publish a formula, the calculator says so instead of guessing.

Do investors pay more stamp duty?

In some states, yes. Queensland and Victoria give lower rates to owner-occupiers, while investors pay general rates. In NSW, the general rates apply to everyone, except for first home buyers who qualify for a concession.

How accurate is it?

It uses the general rates and the concessions listed above. It ignores pensioner and senior concessions, off-the-plan and vacant land rules, other NT rebates, land transfer registration fees and mortgage fees. Eligibility rules, such as living in the home for a set time, still apply.

Sources

Last reviewed by the GridCalculators team.