Skip to content

Bandwidth Calculator

This bandwidth calculator estimates how long a file takes to download at a set connection speed, or how much data a month of daily use will use. It converts between bits, which speeds use, and bytes, which file sizes use.

What do you want to calculate?
Size units
Size unit
Speed unit

Download time (h:mm:ss)

0:06:16

About 6 minutes, 16 seconds at 100 Mbps, before protocol overhead and congestion.

Size in bits
37,600,000,000
Transfer rate (MB/s)
12.5
Time in seconds
376
Time in hours
0.104

How to use this calculator

  1. 1 Choose Download time, or Monthly data.
  2. 2 For a download, enter the file size and its unit, then the connection speed and its unit.
  3. 3 For monthly data, enter your average speed in use, the hours you use it each day and the number of days.
  4. 4 Read the result. Download times are rounded to the nearest second, and the working shows the size in bits.

Bits, bytes and why they matter

A bit is the smallest unit of digital information. It holds a single 0 or 1. A byte is a group of 8 bits, and file sizes are measured in bytes, such as megabytes (MB) and gigabytes (GB).

Internet speeds are measured in bits per second, such as megabits per second (Mbps). So a 100 Mbps connection moves 100 million bits each second, which is only 12.5 million bytes, or 12.5 MB, per second.

This is why a 100 Mbps connection does not download a 100 MB file in one second. The calculator multiplies the file size by 8 first, so both sides use the same unit.

Decimal and binary sizes

Storage and network labels usually use decimal prefixes. One kilobyte is 1,000 bytes, one megabyte is 1,000,000 bytes, and one gigabyte is 1,000,000,000 bytes. The International System of Units (SI) defines these prefixes, and network speeds always use them.

Some operating systems show file sizes in binary steps of 1,024, so a file can look larger. The binary units are called kibibytes (KiB), mebibytes (MiB) and gibibytes (GiB), defined by the IEC. One GiB is 1,073,741,824 bytes.

The difference grows with size. At the gigabyte level it is about 7%, which is why the same file can have two different sizes on two different screens. The calculator lets you pick either base.

Decimal and binary sizes compared
Decimal unitBytesBinary unitBytes
1 KB1,0001 KiB1,024
1 MB1,000,0001 MiB1,048,576
1 GB1,000,000,0001 GiB1,073,741,824
1 TB1,000,000,000,0001 TiB1,099,511,627,776

Monthly data and real-world speed

For a monthly estimate, the calculator uses your average speed in use, not the maximum on your plan. Most connections rarely reach the top speed for long, so a typical speed gives a more realistic total.

Each hour of use at a steady speed adds a fixed amount of data. Multiply that by the hours per day and the number of days to get a month. If you want to measure your real speed first, a speed test gives a useful starting figure.

Actual download times are longer than the best-case figure. Protocol overhead, Wi-Fi limits, the server and other devices on the network all reduce the speed. For network addressing, the IP subnet calculator covers a related topic, and the binary calculator helps you see the bits.

Tips for estimating data use

Small choices change the answer a lot. Check these points before you plan a data budget:

  • Check the unit. Look for Mbps or MB/s, and remember that 8 bits make a byte.
  • Use a realistic speed. A speed test on your connection beats the advertised maximum.
  • Count every device. Video, updates and backups all add to the monthly total.
  • Allow a margin. Estimates are rough, so keep some room under your plan limit.
  • Explore more tools. The developer tools section covers other calculators for encoding and networks.

The formula

Download time

time (s) = file size (bytes) × 8 ÷ speed (bits per second)

× 8
converts bytes to bits, because one byte is 8 bits
speed
Mbps × 1,000,000, Kbps × 1,000 or Gbps × 1,000,000,000 bits per second

Monthly data

GB per month = average speed (bits/s) ÷ 8 × hours × 3,600 × days ÷ 10⁹

÷ 8
converts bits per second to bytes per second
10⁹
bytes in one decimal gigabyte

Decimal or binary size

decimal: 1 GB = 1,000³ bytes; binary: 1 GiB = 1,024³ bytes

GiB
gibibyte, the binary unit that some systems label GB

Worked example

A 4.7 GB file on a 100 Mbps connection

  1. 1.Size in bits: 4.7 GB × 1,000,000,000 × 8 = 37,600,000,000 bits.
  2. 2.Speed in bits per second: 100 Mbps = 100,000,000 bits per second.
  3. 3.Time: 37,600,000,000 ÷ 100,000,000 = 376 seconds.
  4. 4.Convert: 376 seconds = 6 minutes and 16 seconds.

The download takes about 0:06:16 at best. The transfer rate is 12.5 MB/s.

Frequently asked questions

Why does my download run at one eighth of my plan speed?

Internet plans are sold in bits per second (Mbps), but file sizes are in bytes (MB). One byte is 8 bits, so 100 Mbps moves about 12.5 MB of data each second. Protocol overhead and shared networks lower it further.

Why does my file look bigger on my computer than on the label?

Some systems count in 1,024-byte steps and label them KB, MB and GB. Storage and network labels usually use 1,000. A 1 GB file is 1,000,000,000 bytes in decimal and 1,073,741,824 bytes in binary.

How much data does streaming use?

It depends on the quality and the device. Use your own average speed from a speed test or your router statistics, and the hours you actually stream. The monthly result is an estimate, so give it a margin.

Is the download time exact?

No. It is the best-case time at your speed. Real transfers are slower because of overhead, Wi-Fi limits, server speed and other devices on the network.

Sources

Last reviewed by the GridCalculators team.