Skip to content

Gravel Calculator

Estimate how much gravel or crushed stone a path, driveway, base or patio needs. The gravel calculator gives the volume in cubic yards or cubic metres, the weight in tons or tonnes, and the cost.

Shape
Units

Two to four inches is common for paths and driveways.

US tons of 2,000 lb. Check your supplier for their figure.

Extra for spreading, settling and uneven ground.

Set to 0 to leave out the cost.

Gravel needed

2.04 cu yd

Includes 10% waste. Weight uses a density of 1.40 tons/yd³.

Volume before waste
1.85 cu yd (1.42 m³)
Volume with waste
2.04 cu yd (1.56 m³)
Weight in tons
2.85 tons
Cost
$114.07

How to use this calculator

  1. 1 Choose a rectangle or a circle, then pick feet and inches or metres.
  2. 2 Enter the size of the area and the depth of the gravel layer.
  3. 3 Check the density, which depends on the stone. Use your supplier’s figure if you have one.
  4. 4 Add a waste allowance, and an optional price per ton or tonne, then read the volume and the weight to order.

What is gravel volume?

Gravel is sold by weight in many places, but it is spread by volume. The volume calculator covers other shapes. This calculator starts with the volume you need, then converts it to weight so you can compare quotes. Suppliers may quote by the cubic yard, the cubic metre, the ton or the tonne.

Gravel is used for driveways, paths, drainage, patios and the base under concrete or paving. The depth you choose matters more than most people expect. A few centimetres more depth can add a lot of material.

How gravel volume is calculated

The volume is the area of the surface times the depth. For a rectangle, the area is length times width. For a circle, the area is pi times the radius squared. The depth must be in the same unit as the area, so the calculator converts inches to feet, or centimetres to metres, for you.

Weight comes from density. Multiply the volume by the density of the stone to get the weight. Crushed stone, river gravel and limestone have different densities, and wet material is heavier than dry. That is why the calculator asks for a density. The density calculator works the same relationship in reverse.

Cubic yards, tons and tonnes

In the United States, a ton is 2,000 pounds, also called a short ton. A metric tonne is 1,000 kilograms, which is about 2,205 pounds. The difference is about 10%, so check which one your supplier uses before you order.

One cubic yard is 27 cubic feet, or about 0.76 cubic metres. The metric default in this calculator is 1.6 tonnes per cubic metre. The exact figure depends on the stone, so use the supplier’s density when you can.

Tips for ordering gravel

Order a little extra. Gravel settles and spreads unevenly, and some sinks into the ground. Waste of 10% is a common starting point, but use more on soft or uneven ground.

If you are laying gravel over soil, compare the result with the mulch calculator for a planting bed, or the concrete calculator for a base under a slab.

  • Measure the depth at several points. Compacted gravel is thinner than loose gravel.
  • Ask whether the price includes delivery. A short load can cost more per ton.
  • Check the local rules for drainage, erosion control and permeable surfaces.
  • Consider a weed membrane under the gravel if you want fewer weeds.

Safety with gravel and heavy loads

Gravel is heavy. A full wheelbarrow can be too much to push over soft ground, so take smaller loads. Wear gloves, sturdy boots and eye protection when you shovel or spread stone.

Before you dig, contact your local utility locator service. In the United States, call 811. Stand well clear of a tipping truck when it unloads, because the load can shift suddenly.

The formula

Volume

Volume = area × depth

area
length × width for a rectangle, or π × (diameter ÷ 2)² for a circle
depth
the thickness of the layer, in the same unit as the area

Volume with waste

Volume with waste = volume × (1 + waste ÷ 100)

waste
the allowance for spreading, settling and uneven ground, as a percentage

Weight and cost

Weight = volume with waste × density Cost = weight × price per ton or tonne

density
tons per cubic yard, or tonnes per cubic metre, from your supplier
price
the price per ton or tonne, if you set one

Worked example

A 20 ft by 10 ft area, 3 inches deep, at 1.4 tons per cubic yard

  1. 1.Volume: 20 × 10 × (3 ÷ 12) = 50 cubic feet, or 50 ÷ 27 = 1.85 cubic yards
  2. 2.With waste: 1.85 × 1.10 = 2.04 cubic yards
  3. 3.Weight: 2.037 × 1.4 = 2.85 tons
  4. 4.Cost at $40 per ton: 2.852 × $40 = $114.07

Order about 2.04 cubic yards of gravel, which weighs about 2.85 tons and costs about $114.07.

Frequently asked questions

How much gravel do I need for a driveway?

Work out the area in feet or metres, then multiply by the depth. Driveways often use a deeper base than paths, so check your plan and local practice. Add waste, then round up to the supplier’s smallest load.

How many tons are in a cubic yard of gravel?

It depends on the stone and how wet it is. This calculator uses 1.4 tons per cubic yard by default, but your supplier’s figure is the best guide. Change the density to match it.

Is a ton the same as a tonne?

No. A US ton is 2,000 pounds, and a metric tonne is 1,000 kilograms. The tonne is about 10% heavier, so check which unit your supplier uses.

Why does the calculator ask for a waste allowance?

Gravel spreads, settles and sinks into soft ground, so the final layer is often thinner than planned. A waste allowance covers that gap and avoids a shortage halfway through the job.

Sources

Last reviewed by the GridCalculators team.