How to use this calculator
- 1 Type the number x. It must be greater than 0.
- 2 Type the base b. It must be greater than 0 and not equal to 1. The default is 10.
- 3 Read the logarithm. The extra results show ln, log base 10 and log base 2 of the same number, plus a check.
What a logarithm means
A logarithm is the reverse of a power. Since 10³ = 1,000, the logarithm of 1,000 in base 10 is 3. We write this as log₁₀(1,000) = 3.
Here are a few more. Since 2³ = 8, the logarithm of 8 in base 2 is 3. Since 3⁴ = 81, the logarithm of 81 in base 3 is 4. In each case, the logarithm is the power.
If you know a power, you can flip it into a logarithm. The exponent calculator works in the forward direction, from base and power to the answer.
Common, natural and binary logs
Three bases come up often. The common log uses base 10, and it is the one many calculators label “log”. It is used for scales such as pH and decibels.
The natural log uses base e, which is about 2.71828. It is written ln, and it appears in growth, decay and compound interest. The binary log uses base 2, and it is useful in computing, where data is counted in bits.
The calculator shows all three for your number, so you can compare them. For example, log₂(1,024) is 10, because 2¹⁰ = 1,024.
Why logs turn multiplying into adding
Logs turn multiplication into addition. Multiply 100 by 1,000 to get 100,000. In logs, 2 + 3 = 5, because the logs of 100 and 1,000 are 2 and 3. And log₁₀(100,000) is 5.
For this reason, logs were used for hard calculations before calculators existed. People looked up logs in tables, added them, then found the answer again.
The same idea helps when numbers are very different in size. A log scale shows each step as the same distance, so the small and large values both fit on one chart.
Logs in any base: change of base
Most calculators only have keys for base 10 and base e. To find a log in any other base, use the change of base formula. Divide the natural log of the number by the natural log of the base.
For example, to find log₃(81), calculate ln(81) ÷ ln(3). This is 4.394449 ÷ 1.098612, which is 4. Check: 3⁴ = 81. The calculator does this step and shows the check.
Using logs to count doublings
Logs help you find how many times something must double. Suppose a value starts at 1 and doubles each year, and you want it to pass 1,000. The answer is log₂(1,000), which is about 9.97.
You can’t have 9.97 years, so the value passes 1,000 in the tenth year. After nine doublings it is 512, and after ten it is 1,024. Use the scientific calculator to try your own numbers with the log keys.
A log also shrinks very large numbers. The log of 1,000,000 in base 10 is 6, which is easier to compare than the number itself. For more on very large numbers, see scientific notation.
The formula
Definition
logᵦ(x) = y means bʸ = x
- b
- the base, greater than 0 and not 1
- x
- the number, greater than 0
- y
- the power the base must be raised to
Change of base
logᵦ(x) = ln(x) ÷ ln(b) and logᵦ(x) = log₁₀(x) ÷ log₁₀(b)
- ln
- the natural log, which uses base e (about 2.71828)
- log₁₀
- the common log, which uses base 10
Worked example
Log base 3 of 81
- 1.Use change of base: log₃(81) = ln(81) ÷ ln(3).
- 2.ln(81) ≈ 4.394449 and ln(3) ≈ 1.098612.
- 3.4.394449 ÷ 1.098612 ≈ 4.
- 4.Check: 3⁴ = 81.
log₃(81) = 4, because 3 raised to the power 4 is 81.
Frequently asked questions
Why must the base not be 1?
Raising 1 to any power always gives 1. So a base of 1 can never reach a number other than 1, and the logarithm would not be defined for most numbers.
Why can’t the number be zero or negative?
A positive base raised to any real power always gives a positive result. So no real power produces 0 or a negative number, and the log is undefined there.
What is the difference between ln and log?
On most calculators, “log” means base 10, and “ln” means the natural log, base e. Both are logs, so the change of base formula converts between any pair.
What is the log of 1?
It is 0 in any base, because any valid base to the power 0 equals 1. For example, log₁₀(1) = 0.
Sources
Last reviewed by the GridCalculators team.