Skip to content

Engine Horsepower Calculator

Estimate how much power a car makes from its weight and a quarter-mile time or trap speed. This engine horsepower calculator gives a rough figure in horsepower and kilowatts, using a formula widely known as Hale’s.

Estimate from
Units

Estimated engine power

270 hp

Estimate for a car weighing 3,000 lb, from a 13.00 s quarter mile.

Kilowatts (kW)
201 kW
Weight used
3,000 lb
Pounds per hp
11.1 lb/hp
Method
Hale elapsed time

How to use this calculator

  1. 1 Choose pounds and mph, or kilograms and km/h, to match your figures.
  2. 2 Enter the vehicle weight, including the driver and fuel, if you know it.
  3. 3 Pick elapsed time for a quarter-mile run, or trap speed for the speed at the end of the run.
  4. 4 Read the estimated horsepower, the kilowatts and the pounds per horsepower.

What this estimate does

A quarter-mile run is a standard drag race distance. The time it takes, and the speed at the end of the run, tell you a lot about how much power is pushing the car. This calculator turns those figures into a power estimate.

The result is an estimate, not a measurement. It does not know about the gearing, the drivetrain, the tyres, the grip or the driver. The tire size calculator shows how tyre size changes speed readings. For a true figure, an engine dyno test is the only reliable method.

How the estimate is worked out

For elapsed time, the formula is weight divided by the quarter-mile time divided by 5.825, all cubed. For trap speed, it is weight times the trap speed divided by 234, all cubed. Both are rules of thumb built from track data.

Heavier cars need more power for the same time, and faster times need more power for the same weight. Because the power rises with the cube of the time or speed ratio, small changes in time make a big change in the estimate.

Using time or trap speed

Elapsed time is the total time from the start line to the finish line. Trap speed is the speed measured near the finish. Trap speed is less affected by the start, so it can be more useful when the launch varies.

Both methods assume a fairly typical car. Four-wheel drive, turbo lag or a very short gear ratio can make the real power differ from the estimate.

Pounds per horsepower

The calculator also shows pounds per horsepower, which is the weight divided by the power. A lower number means more power for each pound, and usually quicker acceleration. The figure varies widely between cars, so compare it only with similar vehicles.

Motorbikes, trucks and electric vehicles are very different, so this formula is designed for petrol and diesel cars. For a broader view of speed and distance, the speed calculator is useful. For torque and rpm figures, use the horsepower calculator.

  • Use a weight that includes the fuel and driver for the run.
  • Check your time against the official timing slip, not a stopwatch.
  • Compare estimates made with the same method, not elapsed time against trap speed.
  • Treat the number as a guide, and get a dyno test for an exact figure. For fuel costs on a trip, the fuel cost calculator helps.

Safety and legal notes

Drag racing and fast driving on public roads are dangerous, and they are illegal in most places. Racing on a public road can cause a crash that injures or kills people who are not in the race.

If you want to test performance, use a closed track with the correct safety equipment, and follow the event rules.

The formula

From elapsed time

hp = weight (lb) ÷ (quarter-mile time ÷ 5.825)³

weight
the vehicle weight in pounds
time
the quarter-mile time in seconds
5.825
a constant from the rule of thumb

From trap speed

hp = weight (lb) × (trap speed (mph) ÷ 234)³

234
a constant from the rule of thumb

Kilowatts and pounds per horsepower

kW = hp × 0.7457 lb per hp = weight ÷ hp

lb per hp
pounds of vehicle weight for each horsepower

Worked example

A 3,000 lb car with a 13.00 second quarter mile

  1. 1.Divide the time by 5.825: 13.00 ÷ 5.825 = 2.2318
  2. 2.Cube it: 2.2318³ = 11.12
  3. 3.Divide the weight: 3,000 ÷ 11.12 = 270 hp
  4. 4.Kilowatts: 270 × 0.7457 = 201 kW
  5. 5.Pounds per horsepower: 3,000 ÷ 270 = 11.1 lb/hp

The estimate is about 270 hp, or 201 kW, which is about 11.1 pounds per horsepower.

Frequently asked questions

How do I estimate horsepower from a quarter-mile time?

Divide the time by 5.825, cube the result, then divide the vehicle weight in pounds by it. The answer is a rough estimate of horsepower.

Is the trap speed method more accurate?

It is not always more accurate, but it is less affected by the start. Use the same method when you compare two cars, so the results are fair.

Why does the weight matter so much?

The estimate scales with weight. A heavier car needs more power to run the same time, so the weight you enter changes the answer directly.

Can I use this for a motorbike or an electric car?

The formula is built for petrol and diesel cars. Motorbikes and electric cars have different drivetrains and power delivery, so the estimate is less reliable for them.

Sources

Last reviewed by the GridCalculators team.