How to use this calculator
- 1 Enter the tire size as printed on the sidewall, such as 225/45R17, or enter the width, aspect ratio and rim separately.
- 2 Choose inches and mph, or millimetres and km/h.
- 3 Optionally enter a second tire size to compare with the first.
- 4 Read the overall diameter, the revolutions per distance and the speedometer error for the second size.
How to read a tire size
A common tire size is written like 225/45R17. The first number is the section width in millimetres, from sidewall to sidewall. The second number is the aspect ratio, which is the sidewall height as a percentage of the width. The R means radial construction, and the last number is the rim diameter in inches.
So a 225/45R17 tire is 225 mm wide, its sidewall is 45% of that width, and it fits a 17 inch rim. Some sizes have a letter in front, such as P for passenger or LT for light truck. The letter does not change the maths.
Overall diameter and sidewall height
The sidewall height is the width times the aspect ratio. For 225/45R17, that is 225 × 0.45 = 101.25 mm, or about 3.99 inches. The overall diameter is the rim diameter plus two sidewalls, which gives about 634 mm or 24.97 inches.
Overall diameter matters because it sets how far the tire travels in one turn. A taller tire covers more ground per turn, so the car travels a longer distance for each revolution.
Why a size change affects the speedometer
A speedometer counts wheel turns and converts them into speed using the original tire size. If you change to a larger tire, the car travels further per turn, so the real speed is higher than the speedometer shows. A smaller tire has the opposite effect.
The calculator shows the error. For example, a 235/40R18 tire is about 1.7% larger in diameter than a 225/45R17, so at a 60 mph reading the true speed is about 61 mph. The speed calculator and distance calculator use the same kind of arithmetic. Small differences like this are normal, but larger changes can affect speed readings, the odometer and some electronic systems.
Tire rules and local practice
Tire sizes are written in the same format in most countries, because the size system follows an international standard. The European Tyre and Rim Technical Organisation, ETRTO, publishes that standard.
Some countries have rules about changing the tire size on a vehicle, and some require the speedometer to read accurately. Check the rules where you drive, and the size listed in your vehicle handbook. The unit converter helps if you need to switch between inches and millimetres.
Tips for choosing tire sizes
Keep the overall diameter close to the original size if you want the speedometer and the gearing to stay accurate. A change in size can also affect fuel use, which the gas mileage calculator can help you track. Make sure the load index and speed rating meet or exceed the original.
Lower-profile tires, with a smaller aspect ratio, have shorter sidewalls. They can look sharp but are more easily damaged by potholes.
- Read the size on the sidewall of your current tire, not the rim.
- Do not mix different sizes on the same axle without expert advice.
- Check the tire pressure after a size change, because the load changes.
- Compare the new size against the old one before you buy.
Safety with tires
Tires carry the whole weight of the vehicle, and their condition affects braking and grip. Check the tread depth and the pressure at least monthly. Replace a tire with damage to the sidewall or cords.
If you are unsure about a size, ask a qualified tire fitter. Fitting the wrong size can affect handling, clearance and stability.
The formula
Sidewall height
Sidewall = width × (aspect ratio ÷ 100)
- width
- the section width, in millimetres
- aspect ratio
- the second number in the size, as a percentage
Overall diameter
Diameter = rim diameter (mm) + 2 × sidewall
- rim diameter
- the last number in the size, in inches, converted to millimetres (× 25.4)
Revolutions per mile or kilometre
Revolutions = distance ÷ (π × diameter)
- distance
- one mile (1,609,344 mm) or one kilometre (1,000,000 mm)
Worked example
A 225/45R17 tire
- 1.Sidewall: 225 × 0.45 = 101.25 mm, or 3.99 inches
- 2.Rim: 17 × 25.4 = 431.8 mm
- 3.Overall diameter: 431.8 + 2 × 101.25 = 634.3 mm, or 24.97 inches
- 4.Revolutions per mile: 1,609,344 ÷ (π × 634.3) = 808 turns
The tire is 24.97 inches (634.3 mm) across and turns about 808 times per mile.
Frequently asked questions
What do the numbers in a tire size mean?
In 225/45R17, 225 is the width in millimetres, 45 is the sidewall height as a percentage of the width, R is the construction type, and 17 is the rim diameter in inches.
How do I find the overall diameter of a tire?
Work out the sidewall height from the width and aspect ratio, double it, and add the rim diameter in millimetres. The calculator does this and gives the answer in inches or millimetres.
Will a bigger tire make my speedometer read slow?
Yes, usually. A larger tire covers more ground per turn, so the car goes faster than the speedometer shows. Check the calculator’s comparison for the exact size difference.
Is a tire size the same worldwide?
The format is the same in most countries, but local rules, markings and speed ratings vary. Check the sidewall and your vehicle handbook before you buy.
Sources
Last reviewed by the GridCalculators team.